Our Products

Compression Fittings

Compression Fittings

We specialize in offering HDPE Saddles, which are majorly used to take a tapping from the HDPE distribution line for carrying a House Service PE Pipe. These HDPE Tapping Saddles are installed when an outlet hole is drilled onto HDPE pipe, on which then HDPE Tapping Saddle is clamped with the help of bolts. These HDPE Tapping Saddles also have a female threaded outlet.

  • Highlights
  • Long life
  • Made using superior quality materials
  • Reliable performance
  • Cost-effective¬†
Pipes & Pipe Fittings

Pipes & Pipe Fittings

We are reckoned as a prominent Manufacturer and Supplier of Pipes & Pipe Fittings, which are remarkable for their high strength. These Pipes & Pipe Fittings are well-acknowledged for being in compliance with the set industrial standards. Pipes & Pipe Fittings, we offer, can be availed in a variety of specifications matching with the requirements of the clients. We assure that these Pipes & Pipe Fittings are made using corrosion resistant materials.


  • Compression fittings like couplers, elbows end caps, saddles etc. Up-to 110 mm, PN 10 / PN 16
  • Molded and Fabricated fittings for pipes from 20 mm to 400 mm
HDPE Pipes

HDPE Pipes

We have gained a trusted name for providing HDPE Pipes (High Density Poly-ethylene Pipes), which are known for their strength and flexibility. These HDPE Pipes are absolutely light weight, non-toxic, non-rusting, hygienic and maintenance free pipes. We deliver the best due to our uncompromising quest for excellence in providing the HDPE Pipes.

  • Salient Features of HDPE Pipes
  • Microbe free water supply : Hygienic
  • Non-toxic pipes : Prevention of health hazards
  • Resistant to corrosion & scaling/Incrustation
  • Chemically inert : Unchanged supplied water quality
  • Non Conductive : Resistance to Electric current & Heat
  • Low frictional losses : Low operation cost
  • Low initial cost : Economic
  • Lower installation cost : Economic
  • Lower weight and easy installation : Economic
    Absolutely maintenance free & long Life Span of 80 – 100 yrs

Size Availability : Size Availability : HDPE Pipes are available in size range from 20 mm to 250 mm & with pressure range from 2.5 to 16kgf/cm2. 

HDPE Pipes Are In Compliance With
Various national & International standards like

  • IS : 14151 HDPE Pipes for sprinkler Irrigation system
  • IS: 4984 HDPE Pipes for Potable Water Supply.

Technical & economic benefits of PE system

  • Highest 'C' value of over 150 throughout the life
  • Lowest frictional losses thus low pumping cost
  • Chemically-inert can carry acidic & alkaline fluids
  • No incrustation / scale formation-remains smooth bore, superior flow characteristic

Durability Of HDPE Pipes
The HDPE Pipe has an expected Life Span of 80 years, owing to the following reasons

  • A flexible pipe in long lengths
  • Weathering resistance extremely good
  • Joints are leak proof, very strong & don't buckle under soil load
  • Resistance to corrosion & abrasion
  • Excellent water hammer characteristics
  • Light weight easy to handle/ transport & installation

Comparison Of HDPE With PVC Solution
HDPE is a much superior solution than PVC as explained below

  • HDPE Pipes
    • HDPE pipes-a high pressure solution up-to 16 bar
    • HDPE weathering resistance extremely good
    • HDPE – A Flexible pipe in long lengths
    • HDPE joints are leak proof, very strong and do not buckle under soil load
    • HDPE pipes have fittings available up-to 16 kg/cm2
    • HDPE Pipes have complete adoptability with Gate valves, NRVs, Service connections & all kinds of Pumps due to their available fittings thus ideal for fluid supply systems
  • PVC Pipes
    • PVC generally in no pressure applications like drainage etc.
    • PVC extremely brittle
    • PVC extremely rigid with length limitation up to 6mtrs
    • PVC Joints buckle and crack under earth loads or ground movement
    • PVC fitting in complete range not available beyond 4 Kg/cm2
    • PVC Pipes have not all required fittings available for such adoptability thus limitations for fluid supply systems
Sprinkler Irrigation System

Sprinkler Irrigation System

We are a registered manufacturer and supplier of Sprinkler Irrigation System. We have been manufacturing these Sprinkler Irrigation Systems for the NMIS National Micro Irrigation Scheme in the four states i.e. Chhattisgarh, MP, Maharashtra and Rajasthan.

The Nodal Agencies are:

  • C.G. Rajya Beej Avam Krishi Vikas Nigam Ltd.
  • Chhattisgrah Housing Board
  • Chhattisgarh State Power Distribution Company Ltd.
  • M.P. State Agro Industies Development Corporation Ltd.
  • Directorate Agri Engineering M.P.
  • Directorate Horticulture, M.P. State Micro Irrigation Corp.
  • Commissioner Agriculture; Maharashtra State
  • Maharastra JAL BOARD
Fittings High Pressure

Fittings High Pressure

Fittings High Pressure